Join the Car Talk Community!

The Spark Hits the Fan

The Puzzler


RAY: We had a GM car that was in the shop recently that had a whole bunch of problems, but none was as interesting as this one.

Most modern cars have an electric cooling fan that's thermostatically controlled, so that when the engine reaches a certain temperature and needs to be cooled off, the fan gets turned on by a switch and a relay.

One of the problems with this car was that the fan was running all the time, whether the engine was hot or ice cold. When you turned the key off, the fan would stop.

So, we opened the hood. It didn't take too long to figure out that someone had hotwired the fan. It turned out that the fan relay was bad, and rather than fix it, someone merely took a jumper wire, spliced it into the hot wire of the fan, and then ran the other end to one of the ignition wires. When the car was turned on and the ignition was energized, the fan ran.

I yanked off the jumper wire. As soon as I did that, the fan began to slow down.

I don't know what possessed me to do this, but I took the wire that had been supplying electricity to the fan, and I touched it to a grounded piece of metal under the hood.

I got a spark!

TOM: Whoa! That wire should be dead, because the only thing it's connected to after you pulled it out was the fan.

RAY: Right. By the way, I also solved another problem that the car had. If the car was running, and you turned the ignition off, the engine would continue to run for sometimes four, five or six seconds.

What the heck was going on?

Think you know? Drop Ray a note!

[ Car Talk Puzzler ]

Support for Car Talk is provided by:

Donate Your Car,
Support Your NPR Station

...and get a tax break!

Get Started

Find a Mechanic


Go



Submit


Rocket Fuel