The Kitchen Carpentry Cure

The Puzzler

RAY: This puzzler was sent in by Jerry Galloway. Here it is:

My friend had purchased a piece of slate to put into the floor in the hearth in front of his fireplace. The slate was 3/4 of an inch thick, by 10 inches wide, by 48 inches long, and weighed on the order of 175 pounds. He had cut a hole in the oak floor that was the same size as the piece of slate.

TOM: He had to plunk it right there, and get his fingers out of the way as fast as possible!

RAY: The depth of the hole was exactly 3/4 of an inch, the same as the slate. And, of course, there was the sub-floor underneath. When he put one end of the slate into the hole in the floor, he realized that he would have to drop the other end to get the slate into the hole. He realized that if he dropped the brittle slate, even half an inch, it would break.

Not only that, but it wouldn't go in the hole, anyway. There was so little clearance that he couldn't even use that thin fishing line to lower the end of the slate. So he sat there for the longest time, drinking beers and pondering this dilemma.

After his 5th or 6th trip to the kitchen he returned with something that solved the problem in elegant fashion.

What did he find there that allowed him to lower the slate into the hole without risk of breaking it?

Think you know? Drop Ray a note!

[ Car Talk Puzzler ]

Support for Car Talk is provided by:

Donate Your Car,
Support Your NPR Station

...and get a tax break!

Get Started

Find a Mechanic

Promo tile

Rocket Fuel