Support for Car Talk is provided by:

Car Talk Columns

June 1999


Dear Tom and Ray:

[redtruck.gif]

My wife owns a 1995 Ford Contour. About three months ago, while driving, she began to hear a loud clacking noise. After inspecting the engine, I found that a spark plug had been completely ejected from the head. The threads on the head were completely stripped out. Then it happened again, only on another spark plug. Could it be that there is just too much compression in the engine and this is causing the spark plugs to be expelled? If so, what can be done? -- Fred

Ray: It's definitely not a compression problem, Fred. No engine has enough power to blow out spark plugs. Certainly not a '95 Contour.

Tom: It's an unusual problem, though. I've had spark plugs blow out on me before, but it's always been when I forgot to tighten them. And when that happens, they just slowly work their way out and then blow--with a frighteningly loud sound. But that never strips the threads. You just screw the plug back in and everything's fine (except for the dent on the underside of the hood made by the "launching" spark plug).

Ray: I have occasionally seen plugs that were mismanufactured -- where the threaded part of the plug was slightly too small. In that case, it might not blow out right away, but might leave room for hot exhaust gases to erode the threads over time until there were no threads left. But the odds of that happening on two different cylinders are about the same as the odds of Bob Dole become a national spokesman for male impotence. All right, bad example. But trust me, it's VERY unlikely.

Tom: More likely, last time you were in for service, some rookie mechanic cross threaded a couple of your plugs. That means the threads on the plugs were lined up incorrectly with the threads in the cylinder head. And when he tried to screw in the plugs, he damaged the threads in the holes.

Ray: After he made the mistake, the kid probably tried to "re-tap" the damaged threads in the cylinder head. A "tap" is like a sharp, heavy-duty screw that goes in and "straightens out" damaged threads. But if he cross-threaded the TAP -- which is possible -- then he could have destroyed most of the threads altogether. And that's probably what happened.

Tom: If I were you, I'd have your mechanic back out the remaining plugs and see what kind of condition the threads are in. If they've been damaged, too, he may have to drill out more of the holes and put in inserts. But by doing that now, if necessary, you'll at least save you wife from thinking she's being fired on by NATO forces when the next plug finally blows out.

© 1999 by Tom and Ray Magliozzi and Doug Berman Distributed by King Features Syndicate, Inc.



To buy or not to buy -- options, that is. Are options worth what you pay for them, or are you better off just going with the basics? Order Tom and Ray's pamphlet "Should I Buy, Lease, or Steal My Next Car?" to find out. To order, send (check or money order) to Ruin, P.O. Box 536475, Orlando, FL 32853-6475. You can also order online.


© 1999 by Tom and Ray Magliozzi and Doug Berman Distributed by King Features Syndicate, Inc.

Back to the June 1999 index


[Latest | Previous | Next | Random | Search | Browse | ]

Back to Car Talk Columns

Search Car Talk
GO
Alternative ways to call someone stupid; things my mother taught me; understanding engineers.
Meet Car Talk's latest winner — one of the few, the proud, the recently bathed mechanics.
What's in your trunk? Here are Tom and Ray's suggestions.
What happens when you donate your car? Well....